FJZ-250型高速分幅相机时间测量不确定度分析

FJZ-250型高速转镜分幅相机因转镜速度的不可重复性，光机结构的构造原理和控制系统各路高压触发时间的漂移，导致了时间测量的不确定度。为此，须对相机测量数据进行校正。阐述了校正方法、提供了逐幅校正位置误差的修正系数。若以预置转速对应的名义周期值去处理测量结果，则相机的时间测量合成小确定度将达1％，对名义周期值和名义幅间间隔时间值进行修正后，则可降至0.3％。     

立体视觉测量中的图像匹配策略研究

立体视觉测量广泛应用于机器人导向和各种柔性制造系统中 ,其中图像特征的准确匹配始终是一个难题。推导了共极性线方程 ,采取相关匹配和特征匹配相结合的方法来提高图像匹配的速度和精度 ,利用建模估计得到匹配像点的精确坐标 ,使三维测量精度达到目标距离的 1/10 0 0 0左右     

皮秒扫描相机在半导体激光管输出特性研究中的应用

本工作用Picotron 200型扫描相机和液态氮冷却的CCD摄相机系统对半导体激光二极管LTO22 MC的输出特性进行了测量,其最短输出脉冲宽度为2.1ps。这种半导体激光二极管的发射波长为780nm,连续工作条件下,其输出功率为3mW到5mW。     

离焦散斑技术研究Kirchhoff板在动载作用期的弯曲

本文使用动态离焦散斑技术,测试板的动态弯曲获得成功。并推导了Kirchhoff板动态变形的有关分析,提出了由最大斜率确定材料常数的思想。显然,这是同离焦散斑方法所测数据直接相关的处理手法。     

Experimental verification of drop/impact simulation for a cellular phone

Conducting drop tests to investigate impact behavior and identify failure mechanisms of small-size electronic products is generally expensive and time-consuming. Nevertheless, strict drop/impact performance criteria for hand-held electronic products such as cellular phones play a decisive role in the design because they must withstand unexpected shocks. The design of product durability on impact has heavily relied on the designer's intuition and experience. In this study, a reliable drop/impact simulation for a cellular phone is carried out using the explicit code LS-DYNA. Subsequently globallocal experimental verification is accomplished by means of high-speed photography and impact response measurement. Using this methodology, we predict potential damage locations in a cellular phone and compare them with real statistical data. It is envisaged that development of a reliable methodology of drop/impact simulation will provide us with a powerful and efficient vehicle for improvement of the design quality and reduction of the product development cycle.     

Dioxane Dibromide–Mediated Solvent‐Free Synthesis of Vicinal Dibromides

Structurally varied vicinal dibromides have been synthesized in high yield and good purity through highly stereoselective anti‐addition of bromine across the olefinic linkages using dioxane dibromide (DD) under solvent‐free conditions.     

基于感知的右视点质量可分级编码算法

为了减少立体视频传输如此庞大的数据量，根据人眼的立体掩蔽效应，提出了基于感知的右视点质量可分级编码算法．该算法将宏块分为3类：平坦块、纹理块和边缘块，通过不同的量化步长使得右视点图像块的质量可分级．实验证明根据左视点的图像质量，右视点在人眼感知范围内码率减少25％～37％．该算法能在人眼主观察觉范围内很好地提高码率，进一步消除人眼立体视觉冗余．     

主被动光学图像融合技术研究

本文应用扫描式激光成像雷达获取试验数据并实现对激光数据的三维成像处理,给出了基于目标特征的激光雷达图像与被动光学图像的数据融合方法,实现了激光图像和光学图像间的三维融合。试验结果表明,本文所提出的基于目标特征的两种不同质图像间的融合方法是可行的,融合后的图像具有丰富的光谱信息和三维立体信息。     

Morphology and mechanical behavior of isotactic polypropylene with different stereo‐defect distribution in injection molding

Large amount of work has been published on the isotacticity–properties relationship of isotactic polypropylene (iPP). However, the stereo‐defect distribution dependence of morphology and mechanical properties of iPP injection molding samples is still not clear. In this study, two different isotactic polypropylene (iPP) resins (PP‐A and PP‐B) with similar average isotacticity but different stereo‐defect distribution were selected to investigate the morphology evolution and mechanical properties (tensile and notching) of their injection molding samples using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), 2D wide angle X‐ray diffraction (2D‐WAXD), and scanning electron microscope (SEM). The results of DMA showed that the molecular movement ability of PP‐A (with less uniform distribution of stereo‐defect) was stronger than that of PP‐B, meanwhile the analysis of DSC and SEM suggested that after injection molding, smaller spherullites, and crystals with higher perfection had formed in the specimens of PP‐A. The resulting of tensile properties of PP‐A were found to be better than that of PP‐B. The results of morphology evolution by SEM observation and 2D‐WAXD showed that PP‐A is more likely to occur interspherulite deformation and can disperse the tensile stress more efficiently, and therefore, its crystal structure can withstand a greater force when tensile stress is applied. On the other hand, PP‐B has larger spherulites and boundaries, and low perfection of lamellaes, and the intraspherulte deformation tend to take place. It is easier for the crystal of PP‐B to be broken up and reoriented along the tensile direction. Copyright © 2014 John Wiley & Sons, Ltd.